2 Spacers for 2 Wheels. 113NM(83.3 Ft tb). 5x114.3MM / 5x4.5. 15mm / 0.59 inch.
M12x1.5 / 12mm1.5. High-Strength Aircraft Aluminum Alloy 6061-T6, Forged Material. Brand Wheel Spacers, Real Material, Laser Material Number and Logo on Spacers/Adapters. Hard Anodized for durability and corrosion protection. Precision Engineered Hub-Centric and Model Specific for Perfect Fit and Wheel Balance.
Limited Life Range Tested for Wheel Bolts/Stud (1 Million Times) in accordance to ISO3800. Strength-Tested for Applications (Bolt/Stud/Nut) in accordance to ISO898-1, ISO898-6, SAE J429, SAE J995. Anti-Rust Tested (NSS 72 Hours) for Applications (Bolt/Stud/Nut) in accordance to ISO9227. Hub Centric Design-- NO VIBRATION. Hubcentric Wheel Spacer: The locating ring fits into the space on the wheel exactly as the hub's locating ring would.
This means that the weight of the car is still resting on the hub rather than the wheel studs, meaning the vehicle is set up just like it came from the factory, meaning no vibrations from the wheels, and also protect the studs. Non-hubcentric Wheel Spacer: The weight of the car is no longer on the locating ring and is now on the studs, it more easily cause vibrations from the wheels, and studs bear all weight of the car. BLOXSPORT team design different hub centric(Wheel-centric lip) for different car models. Making the car at high speed, speed cross-country more secure and stable. To ensure car no vibration or shaking.
As the picture show you, The casting material made wheel spacers performance is too bad, easily being snapped off and pose a very serious threat to the driving safety. But BLOXSPORT insist on using the FORGED material, insist on the conception of putting safety in the first place and reject to use the casting material.We made laser material number(Forged Aluminum Alloy 6061-T6 or 7075-T6) and brand logo on spacers. Bolt/Stud affects the safety performance directly, so they are very important accessories.
The good product is always along with the test report and can bear series of test. The world is moving forward and we are improving BLOXSPORRT had upgraded the studs/lug nuts: (1).
Studs/Lug nuts: surface treatment is from chroming to dacromet, becoming more anti-rust(10 Years); (2). Studs: material is from SCM435 Alloy steel to SCM440 alloy steel, so the grade level is from 10.9 grade(vehicle original level) to 12.9 grade(rally racing level).Sample of wheel studs 12.9 grade has been tested according to Test method: ISO898-1:2013, Cor. 1:2013, on 08 December 2015, report No. Report is available on request and can be validated. Machining Precision -- CNC Machined. Professional Data Measurement: The consummate data comes from constant practice, BLOXSPORT always make perfection more perfect. CNC Machined: The wheel spacers were modern CNC machined, Accurate to 0.02mm Machining precision.
The surface was more smooth, increasing car driving more stable and more secure and no vibration. How Thick Should your car fit?
If you not sure which thickness you can install for your car, please use the measuring device to measure from the inside of the straight edge to the inner fender lip as below showing. Remove gad by spacing wheel and tire out to fit with fender after handing. Increased performance in wheel drive conditions, improved appearance. Improve brake caliper clearance, BLOXSPORT spacer adds more clearan between brake caliper and wheel.Add inner fender clearance, add clearance between tire/wheel and inner fender. Add clearance between suspension and tire/wheel. Increase the car wheel track, reduce the body center of gravity, reducing the body deformation.
To improve vehicle stability and improve handing and other functions. To ensure that the car is more flexible, smooth and safe. To be able to make the sability of the vehicle greatly ascend.Installation should only be performed by a trained professional. Vehicle fitment compatibility is only a guide, please ensure that these are the correct ones for your vehicle. Please take the necessary measurements to ensure proper fitment.
We only guarentee that you will receive the spacers that is described, we do not guarentee any fitment onto any vehicle. Please insure that the bolt patterns and thread patterns of your vehicle match the specifications above. That will insure a smooth installation. Safety guidelines(Minimum number of turns for wheel bolts/nuts). M12 x 1.25 = 8.0 turns = approx.10 mm of load bearing shaft length M12 x 1.50 = 6.5 turns = approx. 10 mm of load bearing shaft length M12 x 1.75 = 6.5 turns = approx. 12 mm of load bearing shaft length M14 x 1.25 = 9.0 turns = approx. 12 mm of load bearing shaft length M14 x 1.50 = 7.5 turns = approx. 12 mm of load bearing shaft length 1/2 UNF = 8.0 turns = approx.
11 mm of load bearing shaft length. How much standard torque force of different lug bolts or nuts is? M12: 113NM(83.3Ft-tb); M14: 140NM(103.5Ft-tb); 1/2-20: 130NM(95.8Ft-tb).
More and more customers believe in BLOXSPORT's profession, so choose us. BLOXSPORT have been specializing in manufacturing the wheel parts for 8 years.
, wheel spacers3mm-120mm, 1 inch etc. , custom wheel adapters 5 lug to 5 lug; 4 lug to 4 lug; 5 lug to 6 lug;6 lug to 8 lug... We refuse to use the wheel spacer made of casting aluminum and the bad quality bolt/stud, lug nut. We insist in using the forged aluminum alloy and high quality bolt/stud, lug nutpassed the 1 Million times Fatigue Test, etc.We always insist on four concept respectively. Insistence on the service philosophy that safty is No. 1 and creating the value for our customers. Insistence on designing and producing by ourselves in order to make sure the our product's stability of the quality and reliability. Insistence on the test from the third party. Insistence on requiring ourselves to live up to the highest standard among our rivals in order to make sure that our product will be in the perfect condition in our customer's hand (not only the best quality but also there's no scratch on our products which has been sent to our customers). 4X 2 Black 4WD Hubcentric Wheel Spacers for Mercedes G 63 G55 G500 G65 G Class. 2X 35mm BMW X5 E70 F15 X6 E71 F16 Hub Centric 5x120 Wheel Spacers for BMW X5 X6.
(4) 2 inch Hub Centric Wheel Spacer 6x139.7 for Ford Ranger T4, T5, T6, XLT Black. 14x1.5 - Wheel Hanger for Mercedes Benz Many Models Aluminum Forged 7075-T6. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Wheels, Tires & Parts\Wheel Spacers, Adapters & Hub Centric Rings". The seller is "bloxsports" and is located in this country: CN. This item can be shipped worldwide.