Clip On Handlebar Fork Bar Black Kit For KAWASAKI Z800 2013 2014-2018 Aluminum

  
Our newadapter plate bolts directly to the stock handlebar mount keeping all of the stock clearances, while putting your hands in a more natural position. This setup allows the use of multiple risers giving you the ability to custom tailor the bar height for optimum comfort.

Each plate is machined from tough billet aluminum giving your bike a custom look while making them much stronger than the stock handlebars. The handlebar tubes are kept as separate pieces allowing for inexpensive replacement in the event of a crash.

Our exclusive design will set your bike apart at the race track or your local bike night. Package Includes: 1 Set of Clip On Handlebar. NOTE: Legal only for closed-course competition racing use. Clipon Riser Clamp Installation Instructions.

1 Completely remove your stock grips, controls and handlebar assembly. This kit replaces both the stock handlebar and thetop clamp of the OEM assembly.

2 Use the OEM mounting hardware tosecure the clip-on adapter plate to the OEM handlebar base unit. 3 Bolt the riser clamps to the adapter plate using the included Flat Head bolts. These bolts must have the threads completely coated with blue threadlocking compound before installation.

4 The OEM controls have anti rotation pins, which require you to drill holes in the handlebars for proper installation. Measure the diameter of the holes in the stock handlebars and select the appropriate drill bit. 5 Secure the bars into the riser clamps. Slide the controls into place, noting that the grips should end right where the plastic bar end plug meets the aluminum. Mark the location for the anti rotation pins and drill the holes for them.

Test the controls to be sure that they are securely tightened and that all your controls operate and return properly through the entire range of motion of the bars from lock to lock. 6 Installers should pay careful attention that nothing binds through the entire range of motion. Note the brake master cylinder will sit completely outside the riser clamp when installed. The brake line will need to be cracked loose and rotated about 15 degrees up to clear the gauges. Be sure to bleed the brake line to be certain that there is no air in the system before operating the motorcycle.

Front View shown with 1.5 inch risers. Ensure that the cables, hoses and all control parts do not contact any part of the motorcycle and that you have full ability to manipulate the controls throughout the entire range of steering. FAILURE TO HEED THESE WARNINGS MAY CAUSE LOSS OF CONTROL OF MOTORCYCLE AND SERIOUS INJURY OR DEATH. DO NOT OPERATE THE MOTORCYCLE IF THERE ARE ANY INTERFERENCE ISSUES WITH EITHER THE MOTORCYCLE PARTS OR YOUR BODY, OR WITH A THROTTLE THAT DOES NOT RETURN FREELY. If you are not 100% satisfied, please let us know the Detailed Problem, We will give you a 100% satisfactory solution. You brought wrong size or wrong item.

Communication is the best way to solve problem. Our goal is to make sure you are a happy customer and pleasant shopping with us. Visit Our Store For Best Deal! This item is in the category "eBay Motors\Parts & Accessories\Motorcycle Parts\Handlebars, Grips & Levers\Other Handlebars & Levers". The seller is "withmonica" and is located in this country: CN.

This item can be shipped worldwide.

• Country/Region of Manufacture: China
• Brand: Unbranded
• Color: Black
• Placement on Vehicle: Front
• Surface Finish: Anodized
• Package Includes: 1 Set of Clip On Handlebar
• Material: Aluminum